Browsing by Subject "Roasting"

Now showing 1 - 2 of 2

Characterization of the aroma properties in fragrant rapeseed oil and aroma variation during critical roasting phase
(2023) Zhang, Youfeng; Zhang, Yanyan
Rapeseed oil is one of the third most-produced vegetable oil in the world, which is appreciated for its characteristic flavor and high nutritional value. Fragrant rapeseed oil (FRO) produced by a typical roasting process is popular for its characteristic aroma, which has an annual consumption exceeding 1.5 million tons. However, the changes in aroma blueprint of FRO during the typical roasting processing are still unclear, which challenges rapeseed oil quality and consumer acceptance. Accordingly, the aim of this work was to investigate the aroma characteristics and their precursors pyrolysis behavior of FRO to provide a basis and guidance for the control of FRO aroma quality during production processing. First, a systematic review on summarizing, comparing, and critiquing the literature regarding the flavor of rapeseed oil, especially about employed analysis techniques (i.e., extraction, qualitative, quantitative, sensorial, and chemometric methods), identified representative/off-flavor compounds, and effects of different treatments during the processes (dehulling, roasting, microwave, flavoring with herbs, refining, oil heating, and storage) was performed. One hundred and thirty-seven odorants found in rapeseed oil from literature are listed, including aldehydes, ketones, acids, esters, alcohols, phenols, pyrazines, furans, pyrrolines, indoles, pyridines, thiazoles, thiophenes, further S-containing compounds, nitriles, and alkenes, and possible formation pathways of some key aroma-active compounds are also proposed. Nevertheless, some of these compounds require further validation (e.g., nitriles) due to lack of recombination experiments in the previous work. To wrap up, advanced flavor analysis techniques should be evolved toward time-saving, portability, real-time monitoring, and visualization, which aims to obtain a “complete” flavor profile of rapeseed oil. Aparting from that, studies to elucidate the influence of key roasting processing on the formation of aroma-active compounds are needed to deepen understanding of factors resulting in flavor variations of rapeseed oil. Following, a systematic comparison among five flavor trapping techniques including solid-phase microextraction (SPME), SPME-Arrow, headspace stir bar sorptive extraction (HSSE), direct thermal desorption (DTD), and solvent-assisted flavor evaporation (SAFE) for hot-pressed rapeseed oil was conducted. Besides, methodological validation of these five approaches for 31 aroma standards found in rapeseed oil was conducted to compare their stability, reliability, and robustness. For the qualification of the odorants in hot-pressed rapeseed oil, SAFE gave the best performance, mainly due to the high sample volumes, but it performed worse than other methods regarding linearity, recovery, and repeatability. SPME-Arrow gave good performances in not only odorant extraction but also quantification, which is considered most suitable for quantifying odorants in hot-pressed rapeseed oil. Taking cost/performance ratio into account, SPME is still an efficient flavor extraction method. Multi-method combination of flavor capturing techniques might also be an option of aroma analysis for oil matrix. Afterwards, by application of the Sensomics approach the key odorants in representative commercial FRO samples were decoded. On the basis of the aroma blueprint, changes of overall aroma profiles of oils and their key odorants were studied and compared in different roasting conditions. To better simulate industrial conditions, high temperatures (150-200 ºC) were used in our roasting study, which was rarely studied before. Identification and quantitation of the key odorants in FRO were well performed by means of the Sensomics concept. Glucosinolate degradation products were a special kind of key odorants existing in rapeseed oil. Most of the odorants showed first rising and then decline trends as the roasting process progressed. Aroma profile results showed that high-temperature-short time and low-temperature-long time conditions could have similar effects on the aroma profiles of roasted rapeseed oils, which could provide a reference for the time cost savings in industrial production. To gain the fundamental knowledge of the aroma formation in FRO, the thermal degradation behavior of progoitrin (the main glucosinolate of rapeseed) and the corresponding generated volatile products were investigated in liquid (phosphate buffer at a pH value of 5.0, 7.0, or 9.0) and solid phase systems (sea sand and rapeseed powder). The highest thermal degradation rate of progoitrin at high temperatures (150-200 ºC) was observed at a pH value of 9.0, followed by sea sand and then rapeseed powder. It could be inferred that bimolecular nucleophilic substitution reaction (SN2) was mainly taken place under basic conditions. The highest degradation rate under basic conditions might result from the high nucleophilicity of present hydroxide ions. Under the applied conditions in this study, 2,4-pentadienenitrile was the major nitrile formed from progoitrin during thermal degradation at high temperature compared to l-cyano-2-hydroxy-3-butene, which might be less stable. The possible formation pathways of major S-containing (thiophenes) and N-containing (nitriles) volatile (flavor) compounds were proposed. Hydrogen sulfide, as a degradation product of glucosinolates, could act as a sulfur source to react further with glucose to generate thiophenes. Overall, the present work comprehensively documented the effects of thermal conditions and matrices on the aroma characteristics, aroma profiles, and key odorants of hot-pressed rapeseed oil, which could provide data and theoretical basis for the flavor control of FRO under thermal treatment at actual production temperatures (150-200 °C).
The potential of spectroscopic techniques in coffee analysis - a review
(2021) Munyendo, Leah; Njoroge, Daniel; Hitzmann, Bernd
This review provides an overview of recent studies on the potential of spectroscopy techniques (mid-infrared, near infrared, Raman, and fluorescence spectroscopy) used in coffee analysis. It specifically covers their applications in coffee roasting supervision, adulterants and defective beans detection, prediction of specialty coffee quality and coffees’ sensory attributes, discrimination of coffee based on variety, species, and geographical origin, and prediction of coffees chemical composition. These are important aspects that significantly affect the overall quality of coffee and consequently its market price and finally quality of the brew. From the reviewed literature, spectroscopic methods could be used to evaluate coffee for different parameters along the production process as evidenced by reported robust prediction models. Nevertheless, some techniques have received little attention including Raman and fluorescence spectroscopy, which should be further studied considering their great potential in providing important information. There is more focus on the use of near infrared spectroscopy; however, few multivariate analysis techniques have been explored. With the growing demand for fast, robust, and accurate analytical methods for coffee quality assessment and its authentication, there are other areas to be studied and the field of coffee spectroscopy provides a vast opportunity for scientific investigation.